l | @r @l|k @o @l
| @Number of Spindle | @2 spindles | |
| Lower Spindle |
@Speed | @300, 500 ...@Belt change @(variable speed). |
| @Oblique@angle | @0 ` 30@0 ` 60 | |
| Upper Spindle |
@Speed | @380A830 r.p.m@Belr change |
| @Oscillating frequency | @30 per minutes | |
| @Oscillating stroke | @0 ` 60 mm. | |
| @Timer | @multi timer | |
| @Motor | @200V@@200W@@4P@@3phase@@4pcs. | |
| @200V@@ 40W@@4P@@3phase@@2pcs. | ||
| @Coolant pump | @200V@@ 40W@@2P@@3phase@@1pc. | |
| Dimensions | @Machine | @W@1,200o@@D@800o@@H@1,400o |
| @Abrasive liquid | @W@@400o@@D@740o@@H@@300o | |
| @Weight | @Machine | @320kg. |
| @Abrasive liquid | @25kg.@excluding abrasive liquid | |
@@lens dish axis to front at any selected angle between 0 and 30to
@@el-minate dead angle for polishing radius surface and reversing rotation
@@between upper and lower spindles and also oscillating upper lens dish
@@spindle.@Stable polishing can be obtained with preventing pellet flaw
@@caused by stopping spindle on account of sophisticate designe.
2j The machine with sticking multi-lens pellets is high efficient to polish
@@deep dish work under 120 mm. diameter with lens diameter between 10 and
@@80 mm.@Polishing time can be shorten marvelously to compared to
@@conventional machine.
3j Tommy-bar shall be select-d either for spherical or plain surface as
@@upper spindle is turned reversely against lower spindle compulsorily.
@@Stocked lens dish can be used.
4j Functions are controlled by eash spindle.
5j Work pressure is controlled by air and spindle is moved to up and sown
@@by foot pedal on eash spindle.@Polishing time is set by timer. Work
@@is pressurized by pushing start button and released by finishing work
@@cycle.
6j Abrasive liquid precipitation tank with casters is easy to handle.
7j Oblique type to incline lower lens dish axis between 30and 60is
@@available on request as option.
